Add a bit of whimsy to your front door with a trio of air plant hangers.

Easy DIY Air Plant Trapezes
Thomas J. Story
Thomas J. Story / Sunset Publishing

We have a hunch these miniature trapezes for our favorite epiphytes will be the conversation starter at your next party—particularly if you make them yourself! Here’s how we did it.

We only recommend things we love. If you buy something through our site, we might earn a commission.

Materials

1 Square-cut wood dowel 

2 yards thin suede cord

Variety of tillandsia

Prep 

Using a hand saw, cut the wood dowel into three pieces of the following lengths: 7 ½ inches, 6 inches, and 4 inches. You can also ask at your local hardware store for the dowel rods to be cut for you. Next, snip the suede cord into three lengths: 2 feet 4 inches, 2 feet, and 1 foot 2 inches.

Assemble

Wrap the end of the longest piece of cord (2 feet 4 inches) three times around the largest piece of dowel (7 ½ inches) about a half of an inch in from the edge of the dowel. Tie off the end of the cord with a double knot. Repeat on the opposite end of the dowel, leaving a loose loop of cord between both knots to form what looks like a miniature swing. Trim off any excess cording beyond the double knots at either end.

Care

Hang the dowel from the cord on a wall that receives bright, indirect light. Nestle a tillandsia or two in the corner of the hanger. The curly tendrils will secure the tillandsia in place. Once a week, remove the tillandsia and soak in water overnight.

Keep Reading: